The appliance is configured to restart itself automatically as soon
as it's power supply is connected. Should you for any reason have
problems accessing the appliance and believe that it has not started up
correctly try the following as applicable:
Shut Down the appliance:
If the green light is on, the appliance is running.
- Try to press the power button briefly, you should hear a single
beep and after a few minutes (less than 5) all lights on the front of
the appliacne should turn themselfs off.
- If after pressing the power button briefly you do not hear a
single beep from the appliance, then this may be due to 2 different
reasons:
- The appliace has not completed its startup process yet
- The applinace is locked up.
- We advise that you wait for a few minutes (10 minutes is
sufficient), check the green light is still on and press the power
button briefly again. If you still do not hear a single beep, then
please perform a hard reset.
Power Up the appliance:
The appliance is
preconfigured to start itself automatically as soon as its power supply
is connected. It should therefore only be necessary to start the
appliance manually, if you have performed a shut-down or a hard-reset
manually.
- Make sure the appliance is off (all lights on the front should be off)
- Press the power button briefly. You should hear a single beep and the green LED should turn itself on.
- The normal startup process takes just under 2 minutes. If you do
not have an internet connection, then this process can take several
minutes longer (allow at least 10 minutes)
- During the start up process you shoudl see the blue LED and the amber LED flash a irragularly
- Once the start up process is completed the amber LED will flash every few seconds (5-10 seconds)
NOTE: If a few minutes after powering up the
appliance you hear three beeps, the appliance has had to rebuilt its
file system and will restart itself again. This should only occur if a
hard reset was performed or the power supply was removed whilst the
appliance was running. This is nothing to worry about, it only means
that the start up process will take longer.
Hard Reset
If the appliance cannot be accessed
and cannot be shutdown using the instructions above, then a hard reset
has to be performed. For this press and hold the power button in for 8
seconds (until the green power light turns off). The appliance is now
off.